| Code |
Title
of Paper |
Author/s |
| HA013 |
Standard
Liquids For The Calibration Of Viscometers |
W.Marquardt |
| HA014 |
Influence
Of Droplet Size On Rheological Properties Of Emulsions |
Haake |
| HA016 |
Rheology
Of Dispersions |
W.Marquardt |
| HA020 |
Monitoring
Of Flow Properties Of A Concentrated Titanium Dioxide Suspension And
Microscopic Observation Of Shear Induced Structures. |
F.Bar,
D.Dupuis, A.Ponche |
| HA021 |
UV
Curing Characterisation By Rheological Techniques |
M.Toalson,
T.Richards |
| HL-027E |
Rheological
Interpretation Of Torque Rheometer Mixer Test Data. |
G.Schramm |
| HL-040E |
Blending
& Rheological Measurement Combined |
Dipl.
Ing. M.Schreyer, G.HAAKE GmbH |
| HL-047 |
New Measuring Cell for UV Assisted Thermal Curing at Elevated Temperatures |
|
| HL-101E |
The
Measurement Of The Complex Rheological Properties Of Electro-Viscous
Fluids. |
G.Schramm |
| HL-104E |
Haake
Introduces New Rheometers For Er Fluids. |
Thermo
Haake Group |
| LR-01e |
Establishing
The Test Weight For Mixer Tests |
|
| LR-02e |
Test
Parameters For Mixer Tests |
|
| LR-03e |
Determination
Of The Resident Time For The Twin-Screw Extruder |
|
| LR-04e |
Helpful
Data For Tests With Extruder Sensors |
A.Frendel |
| LR-07e |
Energy
Calculation In Mixers - Torque And Specific Mechanical Energy |
|
| RF-180902-SE-01 |
A
Numerical Study Of Temperature And Shear Flow In A Transiently Loaded
Lubricant Film |
B.O.Ahrstrom,
R.Larsson |
| Rheo
006TP |
No,
It Doesn't Flow |
Robert
H.Brill. |
| Rheo
035 |
Nano3
(Nano Cubic) Technology Achieves A Tenfold Or Greater Increase In
Recording Density. |
FujiFilm |
| Rheo
036 |
RheoScope
1 The Correlation Between Flow And Structure |
P.
Reinheimer, D. Eidam, A. Colin, M. Lescanne |
| Rheo
037 |
RheoScope
And Polarized Light Microscopy |
P
Reinheimer |
| Rheo
044 |
Caber®
Tests On Yield Stress Fluids |
Cambridge
Polymer Group |
| Rheo046 |
Solving
Rheological Application Problems With The Caber 1 Extensional Rheometer
|
J.Nijman,
G.Moench, G.Braithwaite, G.Neal |
| Rheo047 |
New
Technologies For The Investigation Of Low-Viscous Structural Fluids |
S.Kim |
Rheo340 |
Tim’s Top Tips – How To Measure Thixotropy |
T. Kealy |
Rheo342 |
Tim’s Top Tips – How to Measure Yield Stress |
T. Kealy |
Rheo344 |
Tim’s Top Tips – How to Measure Flow & Viscosity |
T. Kealy |
| V140E |
Measuring
Uncertainties At The VT550 |
Kutschmann |
| V157E |
Rheological
Analysis Of Powder Coatings |
Kutschmann |
| V173E |
Yield
Point Measurements With Modern CS Rheometer |
Liehr |
| V211 |
Optimizing
And Forecasting The Filling Behavior Of Coatings With The HAAKE CaBER
1 |
D.Eidam,
J.Nijman |
| V229 |
Solvent Trap & Double Cone System for Reproducible Results in Rheological Measurements of Low Viscous Volatile Fluids |
A.Fischer |
| V230 |
Rheological Methods for Determining Molecular Weight & Molecular Weight Distribution |
A.Fischer |
| |