Laboratory
Reports for Compounding & Extrusion
The list of articles
is regularly updated and expanded and the copies are available mainly
as a PDF file.
To order your free
articles send an email listing the full code reference by completing the
Article Request Form.
We will supply the article/s requested by return email as PDF files.
| Code | Title of Paper |
| LR8906-01 | Establishing The Test Weight For Mixer Tests |
| LR8906-02 | Test Parameters For Mixer Tests |
| LR8906-03 | Determination Of The Resident Time For The Twin-Screw Extruder |
| LR8906-04 | Helpful Data For Tests With Extruder Sensors |
| LR8906-05 | Investigation Of The Influence Of Two Types Of Carbon Black On The Flow Behaviour Of SAN |
| LR8906-06 | Investigation Of The Flow Characteristics Of PEPT At Different Temperatures |
| LR8906-07 | Energy Calculation In Mixers - Torque And Specific Mechanical Energy |
| LR8906-08 | Differentiating Rubber Compounds With The Same Mooney Viscosity |
| LR8906-09 | Investigation Of PVC Dry Blends With Different Stabilisers |
| LR8906-10 | Differentiating PVC Dry Blend Batches With An Extruder Sensor |
| LR8906-11 | Flow And Cross - Linking Behaviour Of Cross-Linking Polyethylene's (XLPE) |
| LR8906-12 | The Curing Behaviour Of Reaction Resin Compounds |
| LR8906-13 | Characterising Masterbatches Using The Screen Life Test Method |
| LR8906-14 | Pigment Differentiation In Masterbatches |
| LR8906-15 | Testing The Flow Characteristics Of Glass Fibre Reinforced TPU |
| LR8906-16 | Extruding Polymers: Viscosity And Die Swell Depending On The Extrusion / Shear Rate |
| LR8906-17 | Examining The Plastifying And Degradation Behaviour Of PVC |
| LR8906-18 | Examining The Influence Of Stabilisers On The Flow Characteristics Of Polyamide |
| LR8906-19 | Differentiating PP Samples From Different Suppliers With The Same MFI Value |
| LR8906-20 | Testing The Flow Properties Of Acrylnitril-Butadiene-Styrol-Terpolymer (ABS) |
| LR8906-21 | Testing The Flow Behaviour Of Two Batches Of A Ceramic Injection Moulding Compound |
| LR8906-22 | Application Of The Speed Program For The Differentiation Of Two Natural Rubber Samples |
| LR8906-23 | Application Of The Temperature Program For The Investigation Of The Gelling Behaviour Of Plastisols |
| LR8906-24 | Influence Of The Incorporation Sequence Of Different Components Of The Same Recipe On The Energy Consumption If The Mixing Process |
| LR8906-26 | Testing The Behaviour Of Thermosetting Compounds With Respect To Flow And Rate Of Cure Making Use Of A Torque Rheometer |
| LR8906-27 | Innovative Solutions For Polymer Processing & Characterisation |
| LR8906-28 | Compounding - Processing - Rheological Testing: All In One Test Run |
| LR8906-29 | How To Relate The Results Of A Torque Rheometer To Problems In Elastomer Processing |
| LR8906-30 | The Residual Current Operated Device & PolyLab |
| LR8906-31 | OQT512 - Applications When Used With The Blown-Film & Sheet, Tape And Ribbon Take-Off |
| LR8906-32 | Optimising Mixer Tests With The Help Of The Worksheet Technique |
| LR-33 | Viscosity Measurement Of LDPE Samples With The Same MFI Value |
| LR-34e | Determination of the reactivity of Coating Powders with the HAAKE comixer and the software Polyview |
| LR-35 | Characterisation Of PVC-Compounds |
| LR-36 | In-Process Measurement At-Line Testing Of 3 HDPE For Determining Film Quality And Simultaneous On-Line MFR/MVR Monitoring |
| LR-37 | Use of Modern PolyLab Torque Rheometer System for Material Characterisation |
| LR-38e | Production of a blend of two different concentrations by a Parallel Double Screw Extruder and a further processing through a Melt Pump and following measurement of the rheological characteristics in Slot and Rod Capillary Dies |
| LR-40 (7-99) | Rubber Testing. Kinetic Quality Control Of Rubber Carbon Black |
| LR-43e | Mini-Lab Compounder and Reactor |
| LR-44e | Test Methods for Characterisation and Optimisation of Recycling Polymers |
| LR-45e | Determining Formulation and predicting Processibility of "PIM" Feedstock |
| LR-46e | Conductivity Measurement for Rubber Compound Qualification |
| LR-47e | Evaluation of an Instrumental Lab-Scale Extruder for Melt Extrusion |
| LR-48e | Influence of the Sample Weight on PVC Fusion Test |
| LR-49e | Filter pressure Valve Test (FPV Test) - A new standard to examine Master Batches, White and Carbon Black Colorants |
| LR-50 | Use of Bench-Top Twin-Screw Extruders for development of Powder Coatings |
| LR-52 | Degredation Tests - A new test procedure to examine Polymers and Antioxidants with the HAAKE MiniLab |
| LR-53 | Pharma MiniLab – A Small Scale Compounder For Pharmaceutical Research - I.A.Frendel |
| LR-55 | Residence Time Measurements In Bench Top Twin-Screw Extruders |
| LR-56 | Ceramics Ð Compounding Of Feed Stock With PTW16XL And Sample Production With HAAKE MiniJet |
| LR-58 | Small Scale Catheter Production |
| LR-62 | Nanocomposites – Examples On Compounding Of Nanoclay Blends In Twin Screw Extruders |
To order your free articles send an email listing the full code reference by completing the Article Request Form.
We will supply the article/s requested by return email as PDF files.
Return to Top of Page I Return to Rheology Articles List I Return to Main Menu
•
Tel: 03 5367 7477
• Fax: 03 5367 6477 •
Email: info@rheologysolutions.com