Temperature controlling is a common task in all laboratories and pilot plants. The HAAKE liquid temperature control equipment covers a temperature range from -90°C to +300°C with an accuracy as high as +/-0.01°C.
There
are over 70 models available which ensures there is a reliable soluion
for nearly every application.
 |
HAAKE Phoenix 11 - Circulating baths for external temperature control The HAAKE Phoenix II systems are designed for external temperature control and manufactured for applications that do not allow direct product contact. Used in combination with a Pt sensor, the circulators ensure high temperature accuracy of 0.01degC for external applications within a temperature range of -90°C to +280°C. •
Cooling
capacities up to 5,000 watts |
|
|
HAAKE Phoenix Bridge Circulators The
units are fitted on to bath vessels with a maximum volume of 100
l. |
|
|
HAAKE Phoenix Open-Bath and Heating Circulators The
Phoenix heating cicrulators are principally designed for temperature
controlling external systems. The available bath opening however
also enables the immersion of samples within the circular bath.
All units have a stainless steel bath and can be used in the range
up to 280°C. The powerful pump guarantees a good heat exchange
and optimum temperature accuracy. New
development: |
|
|
HAAKE
Phoenix
Refrigerated Circulators |
|
|
The
C/DC immersion circulators are used for the temperature control
of baths up to approximately 50 liters. They can be attached to
bath walls with a thickness of up to 25mm using a bracket clamp.
A
pivotal nozzle ensures even mixing and a good temperature distribution
within the entire bath. The minimum depth of the bath must be 150
or 200mm. The TRS feature can be used to avoid turbulence in the
open bath. |
|
|
HAAKE Open-Bath Circulators with Integral Baths (Water) Very rigid baths made from polyphenylene-oxide (PPO) are thermally resistant up to 100°C. Combined with the temperature control untis C10 and DC10, they are inexpensive open-bath circulators to be used with water as the heat transfer liquid. The baths have integrated grips and supports. They are fitted with bridge plates for locating the temperature control unit. A range of accessories is available to simply adapt the units to suit the desired application. |
|
|
HAAKE Open-Bath Circulators with Integral Baths (Water) These clear baths allow observation of objects placed inside as they are temperature controlled. A water cooling coil is necessary for working temperatures below approximately 25°C. These units can also be adapted for external circulation by adding a pump set. Open-Bath Circulators with a built-in recirculation pump. Circulators for the stimultaneous temperature control of external systems such as a photometer and the insertion of flasks or test tubes within the circulator's own bath. A powerful, two-stage pressure pump is availble as a standard feature. |
|
|
HAAKE Open Bath Circulators with Stainless Steel Baths (Water) The high-quality stainless steel used on the bath interior and exterior is a characteristic feature of these circulators. The handles and drain nozzle enable easy handling. The temperature control units C10 and DC10 utilised are suitable for usage with water or a mixture of water and anti-freeze. A large range of accessories such as an immersion cooler, a set for external circulation, test tube racks or lift plates can be used to quickly adapt the circulator for different applications. |
|
|
HAAKE Open Bath Circulators with Stainless Steel Baths (Water and Oil) The temperature control unit is attached to the bath vessel by means of a bridge. The bridge is equipped with openings designed for the subsequent attachments of an immersion cooler, cooling coil and circulation set for temperature controlling external systems. The units combined with the DL30 have an especially large filling range. This enables the frequent exchange of objects with a large volume without triggering level alarms. |
|
|
These space-saving designed heating cicrculators are mainly used for temperature controlling smaller external systems such as density meters, viscometers. photometers, refractometers or similar devices. A powerful pressure pump provides a good heat exchange with closed systems and thus optimum temperature accuracy. |
|
|
HAAKE Refrigerated Circulators The powerful refrigerated circulators in the C/DC class are available either in a space-saving vertical version or an ergonomically flat version. The K10 does not require more space than a sheet of DIN A4 paper at the bench. All units also feature efficient heat removal even at high temperature and enable the temperature controlling of external closed liquid circuits at temperatures well below 0°C. The correct unit selection depends mainly on the required cooling capacity and the desired temperature range. |
|
|
The powerful water-cooled units are equipped with a water flow limiter. The after consumption is kept low thus considerably reducing the operating costs. The cooling capacity for all Phoenix cryostats os controlled by a new fuzzy logic-supported energy management system. The floor-based units are fitted with stable, adjustable castors. |
|
|
The SWB25 features a high safety level for constant-running in addition to a very accurate temperature control (PID control). Speed (shaking fequency) and temperature setting and display is carried out using a keypad and digital display. The heater and contol sensor are located underneath the bath, thus guaranteeing easy cleaning. The fluid level is extremely variable from 50mm to 180mm and allows for an easy adaption to sample vessels of differing heights. A second ready-prepared shaking carriage (optional) can be interchanged quickly and easily. The transparent plastic roof-shaped bath cover (optional) prevents water spillage due to turbulence formation. It is particularly reccomended for temperatures above 70°C. |
|
|
HAAKE Flow-Through Coolers/Immersion These
coolers are equipped with an air-cooled cooling circuit and are
suitable for individual cooling applications: The
lowest reachable temperature depends upon: |
|
|
All Haake circulators and cryostats are always delivered with nozzles for tubings with an inner diameter of 8 and 12mm. The tubings and insulation (if applicable) have to be ordered seperately and should be selected according to your application. |
|
|
HAAKE Thermstar 95Plus - The Application Software for all Thermo Haake Phoenix and DC Line Circulators Circulators of the Phoenix-line or a DC30, DL 30 or DC50 model can be connected to a PC and controlled under Windows 95, 98 or NT. |
|
|
HAAKE Pt100-Sensors/ Tubing Connecting/ Replenishing Device A range of sensors is available for external temperature control applications with circulators and cryostats. |
|
Each Thermo Haake circulator has been given an individual star rating to assist you in choosing the correct circulator to meet your specifications and specific application. |
|
|
|
HAAKE TC-Line Water Recirculators TC Chillers are available as basics versions in 3 sizes with 5 capacity classes between 900 and 4900 watts. A pressure gauge is built-in as standard in every TC chiller. The units have digital control and set temperatures and can be easily programmed using a push button key pad. |
|
HAAKE DynaMax 1200 & 1700 Dynamic Temperature Control Systems TC Chillers are available as basics versions in 3 sizes with 5 capacity classes between 900 and 4900 watts. Designed to respond rapidly to dynamic temperature changes. The HAAKE DynaMax units dissipate heat from exothermic, chemical reactions much faster than other products in their class and were developed to provide high performance and safety with greater ease of use and lower maintenance requirements.
|
Return to Top of Page I Return to Product Range I Return to Main Menu
