Products - Sensor Systems for HAAKE Viscometers & Rheometers
 

HAAKE Series 1 - HAAKE RotoVisco 1 and HAAKE RheoStress 1

The HAAKE Series 1 instruments are compatible with a whole range of sensor systems made from titanium for the rotating part and stainless steel for the stationary part. Aluminium is used for the disposable systems. For high temperature applications the geometries are equipped with a ceramic shaft to prevent excessive heat loss.

Below is a selection of commonly used sensor systems. For other sensor systems please contact us.

 

 

Technical Specifications
Model
HAAKE RotoVisco 11)
HAAKE RheoStress 11)
Typical Sensor Systems
Shear Rate (1/s)
Viscosity (mPas)
Shear Rate (1/s)
Viscosity (mPas)
Double gap cylinder system DG43
0.5 - 3300
0.1 - 3.8E+05
0.08 - 3900
0.002 - 4.6E+06
Cylinder diameter 34 mm ISO 3219 Z34 DIN
0.2 - 1300
0.7 - 2.4E+06
0.03 - 1500
0.01 - 2.8E+07
Cylinder diameter 20 mm ISO 3219 Z20 DIN
0.2 - 1300
3.7 - 1.2E+07
0.03 - 1500
0.06 - 1.5E+08
Cylinder diameter 10 mm ISO 3219 Z10 DIN
0.2 - 1300
30 - 1.0E+08
0.03 - 1500
0.5 - 1.2E+09
Cylinder diameter 41 mm DIN 53018 Z41
0.3 - 2300
0.3 - 9.6E+05
0.06 - 2800
0.005 - 1.2E+07
Cylinder diameter 38 mm DIN 53018 Z38
0.15 - 900
0.9 - 3.0E+06
0.02 - 1100
0.015 - 3.6E+07
Cylinder diameter 31 mm DIN 53018 Z31
0.07 - 440
2.7 - 8.9E+06
0.01 - 530
0.045 - 1.1E+08
Profiled cylinder diameter 38 mm Z38/S
0.15 - 900
0.9 - 3.0E+06
0.02 - 1100
0.015 - 3.6E+07
Disposable cylinder diameter 41 mm Z41DIN/E
0.3 - 2300
0.3 - 9.6E+05
0.06 - 2800
0.005 - 1.2E+07
High shear cylinder 25 µm gap HS25
6.9 - 4.6E+04
0.2 - 5.8E+05
1.2 - 5.5E+04
0.003 - 7.0E+06
High shear cylinder 100 µm gap HS100
1.8 - 1.2E+04
0.8 - 2.5E+06
0.3 - 1.4E+04
0.013 - 3.0E+07
Cone diameter 60 mm, 1° angle C60/1
0.9 - 6000
0.3 - 9.8E+05
0.15 - 7200
0.005 - 1.2E+07
Cone diameter 35 mm, 1° angle C35/1
0.9 - 6000
1.5 - 4.9E+06
0.15 - 7200
0.025 - 5.9E+07
Cone diameter 20 mm, 1° angle C20/1
0.9 - 6000
8.0 - 2.7E+07
0.15 - 7200
0.13 - 3,2E+08
Plate diameter 60 mm PP60
0.47 - 3100
0.75 - 2.5E+06
0.079 - 3800
0.013 - 3.0E+07
Plate diameter 35 mm PP35
0.27 - 1800
6.5 - 2.2E+07
0.046 - 2200
0.11 - 2.6E+08
Plate diameter 20 mm PP20
0.16 - 1000
61 - 2.0E+08
0.026 - 1300
1.0 - 2.4E+09
Plate diameter 35 mm serrated PP35/S
0.27 - 1800
6.5 - 2.2E+07
0.046 - 2200
0.11 - 2.6E+08
Plate diameter 20 mm serrated PP20/S
0.16 - 1000
61 - 2.0E+08
0.026 - 1300
1.0 - 2.4E+09
Starch Rotor diameter 40, 2 wings ST40
- -
10 - 100 000
- -
10 - 100 000
Vane rotor diameter 40 mm, 5 wings FL40
- -
5.6 - 1.9E+07
- -
0.093 - 2.2E+08
Vane rotor diameter 22 mm, 5 wings FL22
- -
54 - 1.8E+08
- -
0.9 - 2.2E+09
HAAKE RheoScope 12)
Polished Sensor Systems
Plate diameter 35 mm
Plate diameter 60 mm
Cone diameter 35 mm 1° angle
Cone diameter 60 mm 1° angle

 

 

For a copy of the product brochure or further information, please complete the Information Request Form.

Return to Top of Page I Return to Sensor Systems I Return to Controlled Stress Rheometer I Return to Controlled Rate Viscometer I Return to Product Range I Return to Main Menu

 
 

• Tel: 03 5367 7477 • Fax: 03 5367 6477 • Email: info@rheologysolutions.com