Manufactured By: Thermo Fisher Scientific
A range of sensors is available for external temperature control applications with circulators and cryostats.
The following sensors are available for external temperature control applications (ETC-Systems) with circulators and cryostats.
Sensor DTT for DC50 Units
Pt 100 sensor in closed protection tube made from stainless steel 18/8, 150mm long, diameter 3mm, cable length 3m, up to 600°C.
as sensor DTT, 27 mm long, diameter 3mm, with thread M 10 x 1, cable length 3m, up to 600°C
as sensor DTT, 27 mm long,only to be used with the T-piece 001-1766, cable length 3 m, up to 600°C.
This device enables the user to top up evaporated into a bath circulator automatically. The loss of water will be compensated in small portions only to avoid temperature shocks and drfts. The device comprises a controller and a float switch. The switch has to be mounted into the bath cover of the circulator.
This device enables the user to increase and control the temperature range of a circulator pump by up to 3 bar of pressure.