The list of articles is regularly updated and expanded and the copies are available mainly as a PDF file.
To order your free articles send an email listing the full code reference by completing the Article Request Form and we will supply the article/s requested by return email as PDF files.
| Article Name | Author | Code |
|---|---|---|
| Interactive Dictionary for Polymer Industries | Rheology Solutions Pty Ltd | |
| Rheology Solutions Kit for Polymer Industries | Rheology Solutions Pty Ltd | |
| Understanding a Fog Testing System | S.Pratt | ANTCFOFTEST0311 |
| Performance of Peltier II System for Series 1 Rheometer | W.Marquardt | HA008 |
| MiniLab – Compunder and Reactor | G.Isaakides, Dr.A.Frendel, J.Bouton | HA009 |
| Improvements on Laboratory Scaled Mixers for Rubber compound Qualification | HA010 | |
| Standard Liquids for the Calibration of Viscometers | W.Marquardt | HA013 |
| Influence of Droplet Size on Rheological Properties of Emulsions | HAAKE | HA014 |
| Special Motor Technology Allows New and Improved Rheological Test Methods | W.Marquardt | HA015 |
| Calibration of Rotational Rheometers | W.Marquardt | HA018 |
| New Experimental Possibilities for the Investigation of the Melting of Polymer Blends | M.Bastian, T.Gabor, P.Reinheimer | HA019 |
| UV Curing Characterisation by Rheological Techniques | M.Toalson, T.Richards | HA021 |
| HAAKE Series 1 – “Lift” Control Options | W.Marquardt | HA022 |
| Elongational Viscosity of Polymer melts. A new method for Labwork and On-Line Monitoring | H Braun, W.Gleissle | HA024 |
| Viscosity Measurement of Novel Polymers and Additives Using a Conical Micro Twin Screw Compounder | S.R.Kim | HA025 |
| Thermo Unveils Pharma-Focused Extruder | Thermo Electron | HA026 |
| Conductivity under Shear Flow | Thermo Electron | HA028 |
| Flexibility in Polymer Research | M.Jahling, A.Frendel | HA029 |
| A Practical Approach to Scale-Up from Bench-Top Twin-Screw Extruders | A.Swanborough | HA031 |
| New Measuring Cell for UV Assisted Thermal Curing at Elevated Temperatures | HA047 | |
| Advances in Small Scale Processing Equipment for Polymers and Additives | A.Swanborough | HA049 |
| The Impact of PE Based Adhesive Resins and Other Thermoplastic Matrix on Mechanical Properties of Ground Rubber Tires-Thermoplastics Composites | S.Kim, C.Han, S.J.Kim | HA052 |
| Dies for Rheomex Extruders: Horizontal Sheet and Ribbon Dies | Thermo HAAKE Group | HL-011E |
| Parallel Twin Screw Extruder – Rheomex PTW25 | Thermo HAAKE Group | HL-013E |
| The HAAKE Optical Testing system – OQT512 | Thermo HAAKE Group | HL-014E |
| Technical Paper 1 – The Processibility Testing of Pourable Thermoset Compounds | Thermo HAAKE Group | HL-015E |
| Technical Paper 2 – The Testing of the Flow and Cure Properties of Pourable Thermoset Compounds | Thermo HAAKE Group | HL-016E |
| How to Relate Test Results to Problem in Fire Production | M.Schreyer | HL-017E |
| Modern Test Methods for Characterising the Modern Behaviour of Polymers | W.Morio | HL-019E |
| The Rheological Testing of Polymers Using a Modern Computerised Torque Rheometer | Thermo HAAKE Group | HL-022E |
| Comparison of Several Rheometers Using 3PE Polymers to Link Their Results to Molecular Structure and Processibility | G.Schramm | HL-025E |
| Computersied Extruder Capillary Rheometer Tests and Their Evaluation | G.Schramm | HL-026E |
| Rheological Interpretation of Torque Rheometer Mixer Test Data | G.Schramm | HL-027E |
| Proceedings of the China – Japan International Congress on Rheology | Peking University Press. Beijing China | HL-037 |
| Blending & Rheological Measurement Combined | M.Schreyer | HL-040E |
| The Measurement of the Complex Rheological Properties of Electro-Viscous Fluids | G.Shramm | HL-101 |
| HAAKE introduces new Rheometers for ER Fluids | Thermo HAAKE Group | HL-104 |
| Estsablishing the Test Weight for Mixer Tests | LR-01 | |
| Test Parameters for Mixer Tests | LR-02 | |
| Determination of the Resident Time for the Twin Scre Extruder | LR-03 | |
| Helpful Data for Tests with Extruder Sensors | A.Frendel | LR-04 |
| Investigation of the Influence of Two Types of Carbon Black on the Flow Behaviour of SAN | LR-05e | |
| Investigation of the Flow Characteristics of PEPT at Different Temperatures | LR-06e | |
| Energy Calculation In Mixers – Torque and Specific Mechanical Energy | LR-07e | |
| Differentiating Rubber Compounds with the Same Mooney Viscosity | LR-08e | |
| Investigation of PVC Dry Blends with Different Stabilizers | LR-09e | |
| Differentiating PVC Dry Blend Batches with an Extruder Sensor | LR-10e | |
| Flow and Cross-Linking Behaviour of Cross-Linking Polyethylene’s (XLPE) | LR-11 | |
| The Curing Behaviour of Reaction Resin Compounds | LR-12e | |
| Characterizing Masterbatches Using the Screen Life Test Method | LR-13e | |
| Pigment Differentiation in Masterbatches | LR-14e | |
| Testing the Flow Characteristics of Glass Fibre Reinforced TPU | LR-15e | |
| Extruding Polymers: Viscosity and Die Swell Depending on the Extrusion / Shear Rate | LR-16e | |
| Examining the Plastifying and Degradation Behaviour of PVC | LR-17e | |
| Examining the Influence of Stabilizers on the Flow Characteristics of Polyamide | LR-18e | |
| Differentiating PP Samples from Different Suppliers with the Same MFI Value | LR-19e | |
| Testing the Flow Properties Of Acrylnitril-Butadiene-Styrol-Terpolymer (ABS) | LR-20e | |
| Testing the Flow Behaviour of Two Batches of a Ceramic Injection Moulding Compound | LR-21e | |
| Application of the Speed Program for the Differentiation of Two Natural Rubber Samples | LR-22e | |
| Application of the Temperature Program for the Investigation of the Gelling Behaviour of Plastisols | LR-23e | |
| Influence of the Incorporation Sequence of Different Components of the Same Recipe on the Energy Consumption of the Mixing Process | LR-24e | |
| Multiwall Carbon Nanotubes / Polymer Composite Fibres | A.P.Presler, D.Jacques, T.Rantell, R.Andres | LR-25 |
| Testing the Behaviour of Thermosetting Compounds with Respect to Flow and Rate of Cure Making Use of a Torque Rheometer | LR-26e | |
| Innovative Solutions for Polymer Processing & Characterisation | LR-27e | |
| Compounding – Processing – Rheological Testing: All in One Test Run | LR-28e | |
| How to Relate the Results of a Torque Rheometer to Problems in Elastomer Processing | LR-29e | |
| The Residual Current Operated Device & PolyLab | LR-30e | |
| OQT512 – Applications When Used with the Blown-Film & Sheet, Tape and Ribbon Take-Off | LR-31e | |
| Optimising Mixer Tests with the Help of the Worksheet Technique | LR-32e | |
| Viscosity Measurement of LDPE Samples with the Same MFI Value | LR-33e | |
| Characterisation of PVC-Compounds | LR-35e | |
| In-Process Measurement At-Line Testing of 3 HDPE for Determining Film Quality and Simultaneous On-Line MFR/MVR Monitoring | LR-36e | |
| Use of Modern PolyLab Torque Rheometer System for Material Characterisation | LR-37e | |
| Production of a Blend of Two Different Concentrations by a Parallel Double Screw Extruder and a Further Processing Through a Melt Pump and Following Measurement of the Rheological Characteristics in Slot and Rod Capillary Dies | LR-38e | |
| New Die Design for the Characterisation of the Extensional and Shear Properties of Polymers for Laboratory and On-line Use | A.Rutherford, P.Reinheimer, G.Chaidron, J.Nijman, H.Petri | LR-39 |
| Rubber Testing. Kinetic Quality Control Of Rubber Carbon Black | LR-40 | |
| A Collaborative Study of the Structural and Rheological Properties of EVOH/SMA Blends Produced by Reactive Extrusion | P.S.Hope, J.G.Bonner, J.E.Curry | LR-42 |
| Mini-Lab Compounder and Reactor | LR-43 | |
| Test Methods for Characterisation and Optimisation of Recycling Polymers | LR-44e | |
| Determining Formulation and Predicting Processibility of “PIM” Feedstock | LR-45e | |
| Conductivity Measurement for Rubber Compound Qualification | LR-46e | |
| Evaluation of an Instrumentation Lab-Scale Extruder for Melt Extrusion | LR-47 | |
| Influence of the Sample Weight on PVC Fusion Test | LR-48e | |
| Filter Pressure Valve Test (FPV test) – A New Standard to Examine Master Batches, White and Carbon Black Colorants | LR-49e | |
| Use of Bench-Top Twin Screw Extruders for Development of Powder Coatings | LR-50 | |
| Recent Developments on Bench-Top Twin-Screw Compounders | A.Swanborough | LR-51 |
| Degradation Tests – A New Test Procedure to Examine Polymers and Antioxidants with the HAAKE MiniLab | LR-52 | |
| Online Colour Measurement in Polymer Compounding | LR-54 | |
| Residence Time Measurements In Bench Top Twin-Screw Extruders | A.Swanborough | LR-55 |
| Ceramics – Compounding of Feed Stock with PTW16XL and Sample Productions with MiniJet | I.A.Frendel | LR-56 |
| The Piezo Axial Vibrator – New Perspectives for On-Line Viscosity Measurements on Polymer | Z.Schuppe, T.Geilen, J.Maia, J.Covac, H.Petri | LR-57 |
| Small Scale Catheter Production | A.Wunsch, D.Haunch, I.A.Frendel | LR-58 |
| Evaluating the Plasticisation Process of Different Soft-PVC Samples | A.Wunsch, I.Frend | LR-59 |
| Correlation between Mixer Tests and the Extrusion Behaviour of PVC Dry Blends | M.Jahrling | LR-60 |
| Measurement of the Irganox Content on Polypropylene Polymers during Extrusion | W.Becker, N.Eisenreich | LR-61 |
| Nanocomposites – Examples on Compounding of Nanoclay Blends in Twin Screw Extruders | A.Wunsch, D.Haunch, I.A.Frendel | LR-62 |
| Influence of the Incorporation Sequence of Different Components on the Energy Consumption of the Mixing Process with the HAAKE PolyLab QC | M.Jahrling | LR-65 |
| Compounding of Carbon Nanotube (CNT) Suspensions with Polypropylene | J.Jahrling, D.Hauch | LR-68 |
| Gas Phase Control of a Polymer Slurry Process for Solvent Acrylic and Water Borne Polymers | Marimex | MX003 |
| Big Brother for Films | O.Hissman | OCS001 |
| The Embedded Solution as a Symbiosis of Intelligent Hardware and Software | O.Hissman | OCS002 |
| Film Inspection – A Question of Location | O.Hissman | OCS003 |
| Online Quality control of Polymers and Extruded Films | O.Hissman | OCS004 |
| Uncompromising Eyes | O.Hissman, G.Finn | OCS006 |
| High-Quality Pharmaceutical Film | O.Hissman, A.Schnabel | OCS007 |
| Complete Control | O.Hissman | OCS008 |
| Standard Search for Specks….Film Inspection | H.Steen, O.Hissman | OCS009 |
| Surface Smoothness Test for Power Cable Semi-Conductive Compounds (Semicons) | Cabot | OCS010 |
| Online Polymer Analysis in Borealis: a Step Change in Process and Quality Control | Borealis | OCS011 |
| Online Measurement of Contaminants on Polymer Pellets | OCS/Borealis | OCS012 |
| Rapid Evaluation of Pigment Dispersion Using a Bench Top Twin Screw Compounder | A.Swanborough | PRISM001 |
| Recent Developments in Bench Top Twin Screw Compounders | A.Swanborough | PRISM002 |
| Small Scale Twin-Screw Extruders for Polyolefins Compound | A.Swanborough | PRISM003 |
| Viscoelastic Properties of Sterculia Striate Gum in the Presence of Sodium Chloride | A.F.deBrito, M.R.Sierakowski, F.Reicher, J.P.A.Feitosa, R.C.M.de Paula | RF-060902-BR-01 |
| Rheology as a Tool for Immiscible Polymer Blends Characterisation: Interfacial Tension and Compatibilisation | P.H.P.Macaubas, N.Raymonde Demarquette | RF-110902-BR-01 |
| Linear Viscoelastic Characterisation of High-Melt-Strength Polypropylenes over a Broad Range of Frequencies | C.He, P.Wood-Adams, J.M.Dealy, R.L.Sammler, T.P.Karjala | RF-110902-CA-01 |
| Carboxymethyl Starch Gels for Ultrasonic Examinations | C.Seidel, W.M.Kulicke | RF-120902-DE-03 |
| Rheological Study of the Sol-Gel Transition in Silica Alkoxides | RF-120902-FR-01 | |
| Phase Morphology Development in Reactively Compatibilised Polyethylene Terephthalate/Elastomer Blends | W.Loyens, G.Greoninckx | RF-130802-SE-01 |
| Estimating Interfacial Tension between Molten Polymers Using Fiber Instabilities | G.Palmer, N.Demarquette | RF-130902-BR-01 |
| Optimization of the Rheological Characterisation for a Biodegradable, Cheap and Multipurpose Thermoplastic Made of Corn Flour | S.Brouuillet Fourman, C.Carrot, N.Mignard, F.Prochazka | RF-160702-FR-01 |
| Effect of surface Modification on the Interfacial Tension Between the Melts of High-Density Polyethylene and Nylon 66 : Correlation Between Rheology and Morphology | H-J.Kim, Y.Seo | RF-190702-KR-01 |
| Time-Tempertaure Studies of Gellan Polysaccharide Gelation in the Presence of High Levels of Co-Solutes | M.T.Nickerson, A.T.Paulson, R.A.Speers | RF-19020902-CA-01 |
| Rheological Study of the Compatibilisation of PVC/PE Blends with Chlorinated Polyethylene | RF-190902-ES-02 | |
| Enhanced Rheological Properties of Polyethylene/EPDM Modified Bituminous Binders | A.Perez-Lepe | RF-190902-ES-03 |
| Alignment Mechanical Characterisation of Vapor Growth Carbon Nanofibers in Polyethylene | L.Lozano, V.Diaz | RF-190902-US-01 |
| Controlling Gel Formation in Clay Dispersions via Water-Soluble Polymer : Viscoelasticity and Kinetics of Gel Formation | H.Sardinha, S.R.Bhatia | RF-190902-US-02 |
| Rheological and Electrical Characterisation of Highly Conducting Polyaniline Gels | I.Gonzalez, M.Vecino | RF-200902-ES-02 |
| Morphology Development by Reactive Compatibilisation and Dynamic Vulcanization of Nylon 6 / EPDM Blends with a High Rubber Fraction | J.Oderkerk, G.Groeninckx | RF-230802-SE-01 |
| Investigation of Wave Interfacial Instabilities in Coextrusion Flows | M.Zatloukal | RF-260302-CZ-01 |
| Gelling of Ceramic Suspensions Using an Algae-Derived Polymer | A.R.Studart, V.C.Pandolfelli, E.Tervoort, L.J.Gauckler | RF-260802-CH-01 |
| The Cambridge Polymer Group Silly Putty “Egg” | Cambridge Polymer Group | Rheo009TP |
| Quality Control in the Polymer Industry – Introduction to Cutting Edge Technologies and Their Application in the Polymer Industry | T.Kealy | Rheo023TP |
| Rheology For The Rubber And Elastomer Industries: Introduction to the Influences Of Rheological and Process Parameters and Methods for Their Measurement | T.Kealy | Rheo024TP |
| Current Possibilities for Extrusion and Mixing – Introduction to the Current Technologies for Measurement and Control Process Parameters | T.Kealy | Rheo026 |
| Nano-Dispersion of Clay Makes Better, Cleaner Plastics | A.E. Messer | Rheo034 |
| Rheoscope 1 The Correlation Between Flow and Structure | P.Reinheimer, D.Eidam, A.Colin, M.Lescanne | Rheo036 |
| Rheoscope and Polarized Light Microscopy | P.Reinheimer | Rheo037 |
| FAQ’s to RheoScope | Thermo HAAKE | Rheo038 |
| New Die Design for the Characterization of the Extensional and Shear Properties of Polymers for Laboratory and On-Line Use | Ruthardt, Reinheimer, G.Chaidron, J.Nijman | Rheo041 |
| Caber® Tests on Yield Stress Fluids | Cambridge Polymer Group | Rheo 044 |
| Through the Looking Glass. An alice in Wonderland View of Polymer Science | D.Solomon | Rheo045 |
| Solving Rheological Application Problems with the Caber 1 Extensional Rheometer | J.Nijman, G.Moench, G.Braithwaite, G.Neal | Rheo046 |
| New Technologies for the Investigation of Low-viscous Structural Fluids | S.Kim | Rheo047 |
| QC Measurements for Liquid Food Products and Packaging | Rheo051 | |
| On-Line Optical QC Measurements for Manufacturing Industries | T.Kealy | Rheo053 |
| Polymer and Polymer Based Process Characterisation for Applications based Material and Extruder Optimisation | A.Swanborough, T.Kealy | Rheo054 |
| Materials Testing for Polymer Processing Industries | T.Kealy | Rheo109 |
| Instrument Application Note: Quality Control in the Polymer Industry | T.Kealy | Rheo177 |
| Instrument Application Note: Current Possibilities for Extrusion and Mixing | T.Kealy | Rheo178 |
| Tim’s Top Tips – Explanation and Evaluation of Compounding | T.Kealy | Rheo289 |
| Tim’s Top Tips – Explanation and Evaluation of Processability | T.Kealy | Rheo290 |
| Tim’s Top Tips – Explanation and Evaluation of Shark Skin | T.Kealy | Rheo291 |
| Tim’s Top Tips – Explanation and Evaluation of Die Swell | T.Kealy | Rheo292 |
| Tim’s Top Tips – How to Measure Flow & Viscosity | T.Kealy | Rheo364 |
| Tim’s Top Tips – How to Measure Thixotropy | T.Kealy | Rheo366 |
| Tim’s Top Tips – How to Measure Yield Stress | T.Kealy | Rheo368 |
| Laboratory and Process Quality Control Techniques for Polymer Manufacturing and Polymer Processing Industries | T.Kealy | Rheo376 |
| Polymer Package for HAAKE Rheometers | W.Marquardt | V125 |
| Measuring Uncertainties at the VT550 | Kutschmann | V140 |
| How to Select the Most Adequate Sensor for Your Application | G.Gonzalez | V166(NR) |
| Understanding the Temperature-Time-Relationship for Thermosetting Systems | C.Gonzalez | V167E |
| Rheological Investigation of Three Rubbers with Different Shore Factors with Respect to their Shape Stability before Curing | Eidam, Liehr | V169E |
| Yield Point Measurements with Modern CS Rheometer | Liehr | V173E |
| Intelligent Software in Rheometry with Snapshot Technology | W.Marquardt | V188 |
| Rheological Tests on Thermoplastic Elastomers | E.Kutschmann | V191E |
| HAAKE CaBER 1 – Molecular Weight Distribution – Polystyrene, Blends of Standards, Same MW, Different MWD | Thermo Haake Group | V212 |
| HAAKE CaBER 1 – Polymer Solutions Polystyrene, Mw =1.8 Mio g/mol in Styrene Oligomers at Very Low Concentrations | Thermo Haake Group | V213 |
| HAAKE CaBER 1 – Binary Polymer Mixtures Polystyrene Blends of Standards Mw =1.8 Mio g/mol + Mw =13 Mio g/mol | Thermo Haake Group | V214 |
| HAAKE CaBER 1 – Reproducibility Newtonian Test Fluids E6000 and E40000 | Thermo Fisher Scientific Group | V215 |
| Test Liquids | Thermo Fisher Scientific Group | V218 |
| Cellusosic Derivatives in Capillary Break-Up – Influence of the MWD and Gel Particles | J.Plog | v219 |
| Measurements on Selected (Semi-Solids) in a Wide Temperature Range using New Solids Clamp | K.Oldorp, J.Nijman, C.Kuchenmeister | V220 |
| Solvent Trap & Double Cone System for Reproducible Results in Rheological Measurements of Low Viscous Volatile Fluids | A.Fischer | V229 |
| Rheological Methods for Determining Molecular Weight & Molecular Weight Distribution | A.Fischer | V230 |
| Improved Torque Sensitivity and Normal Force Resolution for Routine Measurements | A.Fischer | V231 |
| Preparation of a Pressure Cell for Sensitive Measurements | K.Oldorp, U.Schultz | V233 |
| Automatic Detection of the Thermal Degredation of a Polymer | F.de Jong, K.Oldorp | V237 |
| Influence of Preparation Method on Viscosity of Different Poloxamers | T.Agnese, T.Cech, M.G.Herting, F.Soergel | V249 |
| Curing of an Acrylate Glue – Rheology with Simultaneous FTIR-Spectroscopy | K.Oldorp | V254 |